HYPOCHLORITE REACTOR

Hypochiorite solution is prepared continuously with the A. H. Lundberg, Inc., Hypochiorite
Reactor from chlorine and alkali. The Hypochlorite Reactor is delivered as a module ready
for operation upon installation. Connecting points are provided for dilute alkali, chlorine
gas, barometric loop and product outlet.

The alkali used can be either caustic soda or milk of lime solution. The reaction column
is an outer corrosion resistant tube within which is placed a smaller draft tube.
Recirculation of the alkali-hypochlorite solution around the draft tube permits immediate
reaction of the chlorine gas in contrast to slower reaction rates between chlorine and
alkali alone.

Typical construction to the Chlorine-Hypochiorite Reactor is PVC armored with FRP on
the external surfaces.

A complete Lundberg hypochlorite system consists of a dilute alkali storage tank,
hypochlorite reactor, control instrumentation and a hypochlorite storage tank.

FEATURES

•    Hypochlorite Reactor, PVC armored with FRP.
•    Hypochlorite concentration control by chlorine flow to ORP set point.
•    Alkali flow control to meet hypochlorite demand (level).
•    Alkali flow interlocks.
•    Check valves for back flow protection.
•    Barometric loop (field installed).
•    Manual block valves and piping.
•    Skid mounted ready for installation.


OPTIONS

•    Electronic (digital or analog) or pneumatic instrumentation.
•    Reduced height for limited headroom clearance.
•    Alternate materials of construction.
•    Individual components.
•    Complete system supply, including:
    Storage tanks    Chlorine system
    Pumps    Piping and valves
    Alkali dilution    Instrumentation and controls
    Chlorine system    Electrical

Hypochlorite Reactor Dimension Sheet
SR-1028-A